*********************************************
 FMOS FITS Header Sample
        README file

         Ver.1 Masayuki Akiyama 20030805
*********************************************

1. sample_pri_header.txt

Sample primary FITS header.
FMOS specific header information,

A-CORPOS  :  Corrector position (mm)
A-FIBCFG  :  Name of the fibre configuration file
A-FOCP01  :  MOS module number of focal plane position #1.
A-FOCP02  :  MOS module number of focal plane position #2.
   :                                :
A-FOCP12  :  MOS module number of focal plane position #12.
A-CONID1  :  MOS module number of connector slot position #1 for the spectrograph.
A-CONID2  :  MOS module number of connector slot position #2 for the spectrograph.
   :                                :
A-CONID6  :  MOS module number of connector slot position #6 for the spectrograph.
A-SPECID  :  Spectrograph ID name SPEC1/SPEC2
A-SPEMOD  :  Spectroscopy mode. HIGH/LOW
A-SPETMP  :  Spectrograph temparature
A-SPEGID  :  Spectrograph grating ID number, name
A-SPEMID  :  Spectrograph OH supression ID number, name
A-SPEVID  :  Spectrograph VHP grating ID number, name
A-CAMPOS  :  Camera position (degree)
A-CAMFVL  :  Camera focas value (mm)

2. sample_asc_header.txt

Sample ASCII FITS header.
Format of the ASCII header,

NUMBER   :(I3)    Number of the fibre in the frame, from bottom to top, 1-200
NAME     :(A12)   Name of the target of the fibre
RA       :(A12)   RA of the target of the fibre
DEC      :(A12)   DEC of the target of the fibre
XOFF     :(F6.1)  X offset from "home position" of the fibre
YOFF     :(F6.1)  Y offset from :home position" of the fibre
MODNO    :(I3)    Module number of the fibre
FIBNO    :(I3)    Fibre number of the fibre in the module
TYPE     :(A3)    Type of the target (OBJ/STD/FLT/CAL)
MAG      :(F5.2)  Magnitude of the target
PRIORITY :(I3)    Priority of the target
NOTE     :(A20)   Note on the target

3. sample_sim_image.fits

Sample image with the above headers.
Check with your favorite image 
viewer (skycat, ds9, fv).

4. Fibre mapping summary

o in primary header

Focal Plane  Module       Connector         Slit
----------  --------     ----------        ------

 FOCP01     ECHIDNA001   CONID1(SPE1)
 FOCP02     ECHIDNA002   CONID2(SPE1)
 FOCP03     ECHIDNA003   CONID3(SPE1)
 FOCP04     ECHIDNA004   CONID4(SPE1)
 FOCP05     ECHIDNA005   CONID5(SPE1)
 FOCP06     ECHIDNA006   CONID6(SPE1)    No Freedam
 FOCP07     ECHIDNA007   CONID1(SPE2)   
 FOCP08     ECHIDNA008   CONID2(SPE2)
 FOCP09     ECHIDNA009   CONID3(SPE2)
 FOCP10     ECHIDNA010   CONID4(SPE2)
 FOCP11     ECHIDNA011   CONID5(SPE2)
 FOCP12     ECHIDNA012   CONID6(SPE2)
            ECHIDNA013
            ECHIDNA014

Connection between the focal plane, module, connector
can be changed. Any module can fit any position on the
focal plane and any slot in the connector. 
For example,

FOCP01 - ECHIDNA005 - CONID4(SPE1) -> spectrograph.

On the contrary, there is no freedom between the 
connector slot and the slit position in the
spectrograph once it is fixed.

o in ASCII header

Target description in ASCII header

The target is observed with Fibre No.?? of Module No.ECHIDNA???.